The Meteorological Zones and Mean Annual Rainfall Map window helps you fill in two boxes on General Site Information: Select Meteorological Zone for Project and Enter the Mean Annual Rainfall. Open it with the “?” button beside the Meteorological Zone box. It opens showing the zone map; use the buttons along the side to switch to the rainfall maps. The window only displays maps — nothing you do here changes the project, so read the zone and rainfall for your site from the maps, press Back, and type them on General Site Information.

Buttons
| Button | Map shown |
|---|---|
| Zones | Designated meteorological regions (zones) in Florida: the areas of Zones 1 to 5, each in its own colour, with the rainfall stations that define them. This is the map shown when the window opens. |
| Entire State | Mean annual rainfall isopleths (lines of equal rainfall, in inches per year) for the whole state. |
| Northwest | Mean annual rainfall map, Northwest Florida (enlarged). |
| Northeast | Mean annual rainfall map, Northeast Florida (enlarged). |
| Central | Mean annual rainfall map, Central Florida (enlarged). |
| South | Mean annual rainfall map, South Florida (enlarged). |
| Recent Data | A statewide mean annual rainfall map from more recent (2023) data, for comparison. It is marked DRAFT. |
| Help | Opens this page. |
| Back | Closes the window and returns to General Site Information. |
Applicant’s Handbook reference
Appendix M, Figure 1 (Designated Meteorological Regions (Zones) in Florida) and Appendix M, Table 1 (Counties Included in the Designated Meteorological Zones): define Zones 1 to 5; the Zones map shows these regions.
Section 9.4 Rainfall Data and Appendix M, Figure 2 (Average Annual Rainfall Isopleth Map for Florida): the average annual rainfall is the National Centers for Environmental Information value shown by the Appendix M isopleths; the Recent Data (2023) map is not the Appendix M map and is for comparison only.
Source reference
Harper, H.H. and Baker, D.M. (2007). Evaluation of Current Stormwater Design Criteria within the State of Florida. Final report, FDEP Contract S0108, Figure 3-2 (Isopleths of Mean Annual Precipitation in Florida from 1971-2000) and Figure 4-3 (Meteorological Zones Identified Using Cluster Analysis) (link): the rainfall isopleths and the five zones behind the maps.
FDEP and the water management districts (2010). Stormwater Quality Applicant’s Handbook: Design Requirements for Stormwater Treatment Systems in Florida, March 2010 draft (not adopted), Figures 3.1 to 3.6 (the draft, not adopted: PDF, 16 MB): the same set of maps as this window’s buttons: the zones and the rainfall isopleths for the whole state, Northwest, Northeast-North Central, Central and South Florida. The source of the 2023 Recent Data map is not given.
How the two values are used
| Value on General Site Information | Units | How BMPFast uses it |
|---|---|---|
| Meteorological Zone (Florida Zone 1 to 5) | — | Selects the zone’s table of annual runoff coefficients (C, by non-DCIA curve number and % DCIA) used for every catchment, the retention efficiency lookup tables used for retention BMPs, and the harvesting efficiency curves. It is reported as the meteorological zone (Appendix M) in the AHVI Section 9 Compliance Report. |
| Mean Annual Rainfall | inches per year | Sets the annual runoff volume of each catchment: volume (ac-ft/yr) = C × area (ac) × rainfall (in/yr) / 12, for both pre- and post-development conditions. Runoff volumes, and so the nutrient loads, are proportional to it. |
Applicant’s Handbook reference
Section 9.2.1 Calculating Predevelopment and Post-development Hydrology, paragraphs a, c and f (Equation 9-1): the zone selects the Appendix N ROC table, and annual runoff = area × average annual rainfall × ROC × 1/12; BMPFast uses the same equation.
Reading the maps
- Find the site on the Zones map and choose that zone in Select Meteorological Zone for Project.
- Find the site on a rainfall map (the regional maps are easier to read than the statewide one) and read the value between the two nearest isopleths. Enter it in inches; the box accepts decimals.
Sites on a zone boundary or between isopleths
The choice is the engineer’s (Ron Eaglin, October 19, 2026). BMPFast sets no rule for a site that straddles a zone boundary or lies between two rainfall isopleths: choose the zone and the mean annual rainfall that represent the site, and say in the permit application how you chose them.
Sample problems
Worked problems solved in BMPFast, each with every input, the steps with screen captures, the program’s results, a hand check and the project file to download. Captures are for demonstration only. All of them: BMPFast sample problems.