The Tree Well Worksheet calculates the nitrogen (TN) and phosphorus (TP) removal of one or more tree wells in a catchment. You open it from the catchment’s treatment choices after the catchment (area, land use, rainfall zone) has been entered. You describe the size of the planted soil area and its water storage, BMPFast turns that into a treatment depth over the watershed, and reads the removal from the retention efficiency tables.
A tree well is an area that has provided or disturbed soil to support a specific tree. A tree is defined as a woody perennial plant, typically having a single stem or trunk growing to a considerable height and bearing lateral branches at some distance from the ground. The soil has a sustainable porosity, and the supplier should provide that data. If not, the choice in 0.20 inch of water per inch of soil depth is typical. There are three choices within the input field for sustainable porosity. There is an input field for the storage of water above the media, plus the tree canopy capture. The depth of the tree well is specified as the planting depth of the provided or disturbed soil.

How to use this worksheet
- Choose Retention or Detention. Use Retention when the stored water soaks into the ground or is taken up by the tree; use Detention when the tree well has an underdrain that discharges the filtered water (a media mix must then be selected with Media).
- Enter the depth, length and width of the planted (provided or disturbed) soil area, the storage above the media plus canopy capture, and the number of similar tree wells in the catchment.
- Select the Sustainable water storage capacity of the soil (0.16, 0.20 or 0.25), or type the value from the soil supplier.
- Click Calculate. The report appears in the lower pane. Click the same button (now Equations) to see the equations and values used; click again (Report) to return to the report.
- Click Back to keep the values, calculate, and return to the catchment.
Inputs
| Input (as on screen) | Units | What it means / how it is used |
|---|---|---|
| Vegetated Area (Tree Well) depth (ft): | ft | Planting depth of the provided or disturbed soil. Used in the storage calculation. The tree well is treated as not defined (no treatment) while this is 0. Sizing: steps of 0.5 ft, minimum 0.1. |
| Vegetated Area (Tree Well) length (ft): | ft | Length of the planted area of one tree well. Sizing: steps of 5 ft, minimum 1. |
| Vegetated Area (Tree Well) width (ft): | ft | Width of the planted area of one tree well. Sizing: steps of 5 ft, minimum 1. |
| Tree Well Storage (above media + canopy capture) (ft): | ft | Depth of water stored above the soil surface plus the water held by the tree canopy. It is listed in the report; see the note under Method about its use in the current calculation. |
| Number of Tree Well Areas within Watershed: | count | Number of similar tree wells in the catchment; the storage of one well is multiplied by this number. Whole number; default 1. |
| Sustainable water storage capacity of the soil: | (see Method) | Sustainable water storage of the soil. Drop-down choices 0.16, 0.20 and 0.25; you may also type a value from the soil supplier. If no supplier data is available, 0.20 is typical. Sizing: steps of 0.1, minimum 0. |
| Retention or Detention: | choice | Retention: N and P removal equal the hydraulic capture. Detention: the capture is multiplied by the media mix’s N and P reductions (select the mix with Media); with no media mix the removal is 0. Sizing is available for Retention only. |
Values taken from the catchment (not entered here): the watershed area (the catchment’s post-development area), the non-DCIA curve number, DCIA percent and rainfall zone used by the efficiency lookup, and the N and P loads. A tree well normally treats only the runoff from its own catchment; flows routed from upstream catchments bypass it and go on, untreated, to the next catchment. Should one of them be designed to treat the upstream runoff too, untick Bypass upstream runoff on this catchment’s Routing screen (BMPFast asks once when a catchment is first routed into it).
Method and equations
Methodology. BMPFast reads this BMP’s capture from the retention curves. Retention BMPs compares how every retention BMP calculates its Treatment Depth, and Retention Methodology explains the retention curves it is read on.
With Detention, see Media and Filtration Methodology.
BMPFast converts the tree well storage into a treatment depth over the watershed, then reads the hydraulic capture from the retention efficiency lookup tables (the same tables used for Retention), which depend on the treatment depth, the watershed’s non-DCIA curve number, its DCIA percent and the rainfall zone. These equations are shown on the worksheet’s Equations page:
Storage per Area (ac-ft) = Length x Width x (Depth + Soil Storage Capacity) / 43560
Total Storage (ac-ft) = Storage per Area x Number of Similar Areas
Treatment Depth (in) = Total Storage / Watershed Area (ac) x 12
Hydraulic Capture (%) = retention lookup table (Treatment Depth, non-DCIA CN, DCIA %, rainfall zone)
Retention: N removal (%) = P removal (%) = Hydraulic Capture (%)
Detention: N removal (%) = Hydraulic Capture (%) x Media N Reduction (%) / 100
P removal (%) = Hydraulic Capture (%) x Media P Reduction (%) / 100
Removal is limited to 100%. The Tree Well Storage (above media + canopy capture) value does not enter the current storage equation.
Applicant’s Handbook reference
Appendix O, Tree Well: “The nutrient reduction capability of these systems can be calculated in the same way as Dry Retention System”; BMPFast turns the soil storage into a Treatment Depth and reads the dry retention tables (zone, non-DCIA curve number, DCIA, depth).
Appendix O, Dry Retention Systems: the treatment volume must be recovered within 72 hours; BMPFast does not ask for or check recovery for tree wells.
Appendix O, Detention with Engineered Media and Filtration: for the Detention option BMPFast multiplies the capture by the media mix’s reduction, the “volume of water filtered … * Treatment Efficiency of Media” term of this equation, with no detained volume.
Source reference
BMPFast method (TreeWell.cs, about line 130): the storage equation and the soil storage choices 0.16, 0.20 and 0.25 are in the program without a cited source; the sum Depth + Soil Storage Capacity adds a depth in feet to a fraction.
The Equations page
Once the report is current, the Calculate button reads Equations. Clicking it replaces the report with a page that lists the equations, the notes (capture is read from the retention efficiency lookup tables for the Treatment Depth and depends on the curve number, DCIA percent and rainfall zone; N and P removal equal the hydraulic capture), and a Values table: the depth, length, width, soil storage capacity and number of areas; Contributing Area, Watershed Area, Non-DCIA Curve Number, DCIA Percent, Rainfall Zone and Treatment Depth; Hydraulic Capture; the media Treatment Rate (or “no media mix”); and N and P removal. Click again (Report) to return to the report.
Results (the report)
- Tree Well Input Variables: the depth, storage, length, width, sustainable storage capacity, number of similar areas, the resulting Treatment Depth (in) over the watershed, and Retention or Detention.
- Watershed Characteristics: Watershed Area (acres), Contributing Area to BMP (ac), Watershed Non-DCIA Curve Number, Watershed DCIA Percent, Rainfall Zone, Rainfall (in).
- Surface Water Discharge: Provided Nitrogen and Phosphorus Treatment Efficiency (%). A value of 100% or more is shown as 99%.
- Media Mix Information (when a media mix is selected), then Groundwater Discharge (Stand-Alone): Average Annual Recharge (MG/yr) and the TN and TP mass load (kg/yr) and concentration (mg/L) of the groundwater discharge.
- Surface Discharge Load Diagram: N and P load into the tree well (kg/yr), the removal efficiencies, the loads leaving and the mass removed, for this catchment alone.
Buttons and features
| Button | What it does |
|---|---|
| Media | Opens Enter Media Mix Information: select a media mix (built-in or your own; “User Defined” opens the media mix library) and answer “Is the media design residence time more than 2 hours?”. The mix’s TN and TP reductions are shown. Required for the Detention option. |
| Calculate / Equations / Report | Calculate appears whenever the inputs differ from those the report was calculated with; it reads the inputs, calculates and shows the report. When the report is current the button toggles between the Equations page and the Report. |
| Sizing | Opens the Sizing window (Retention only; in Detention it says “Sizing applies to the Retention configuration of a Tree Well. Set Retention or Detention to Retention first.”). Its variables are depth, length (plotted by default), width, soil storage capacity and number of areas. It plots N and P removal against the chosen variable with the removal targets (defaulting to the project’s Maximum % Removal). Apply keeps the new values on the worksheet; Cancel restores the original ones. See Sizing. |
| Cost | Opens the Life-Cycle Cost Analysis for this tree well. |
| Opens the report in the Report Viewer, where you can print it. | |
| Plot | Opens the retention storage curve (capture efficiency against treatment depth over the watershed) with a marker at this tree well’s treatment depth and capture. |
| Help | Opens this page. |
| Back | Saves the values entered, calculates, and closes the worksheet. |
The status bar at the bottom of the window shows the project’s Maximum % Removal for TN and TP.
Notes and limits
- With a depth of 0 the tree well is not defined and provides no treatment.
- A tree well treats only its own catchment’s runoff unless confirmed otherwise on the Routing screen; upstream routed flow bypasses it.
- In Detention, select a media mix with Media; without one the removal is 0.
- The removal is a hydraulic-capture (volume) credit read from the retention lookup tables; no recovery-time adjustment is applied to tree wells.
Sample problems
Worked problems solved in BMPFast, each with every input, the steps with screen captures, the program’s results, a hand check and the project file to download. Captures are for demonstration only. All of them: BMPFast sample problems.